keyboard_arrow_right
Provides power and data connection for up to 16 PoE network devices
keyboard_arrow_right
Save installation cost by delivering data and power over existing network cables
keyboard_arrow_right
10/100/1000 auto-sensing ports automatically detect optimal network speeds
keyboard_arrow_right
Two small form-factor pluggable GBIC module slots (SFP)
keyboard_arrow_right
IEEE 802.3at/af-compliant RJ45 PoE/PoE+ output ports
keyboard_arrow_right
Power output up to 30 watts per port*
keyboard_arrow_right
PoE power budget of 220 watts
keyboard_arrow_right
36 Gbps switch fabric
keyboard_arrow_right
Supports IEEE 802.3at and IEEE 802.3af-compliant PoE devices (wireless access points, VoIP phones, IP cameras, etc.)
keyboard_arrow_right
Supports IEEE 802.3at/af detection and short circuit, overload and high-voltage protection
keyboard_arrow_right
All RJ45 ports with Auto-MDIX and NWay auto-negotiation support
keyboard_arrow_right
Complies with the IEEE 802.3az (Energy Efficient Ethernet EEE) specification
keyboard_arrow_right
PoE management functions include PoE port settings, priority, power-on delay, scheduled PoE device restart and PoE device monitoring
keyboard_arrow_right
The Powered Device Monitor feature (PDM) restarts any connected PoE device that fails to respond or send out network traffic.
keyboard_arrow_right
SNMP Management and Remote Monitoring (RMON)
keyboard_arrow_right
SNMP V1, V2C, V3 with RMON groups 1, 2, 3 & 9
keyboard_arrow_right
IPv4/v6 dual protocol
keyboard_arrow_right
Supports VLAN (tag-based and port-based)
keyboard_arrow_right
Provides IEEE 802.1x port-based security
keyboard_arrow_right
Supports link aggregation (trunking)
keyboard_arrow_right
Supports bandwidth control per port
keyboard_arrow_right
Supports port mirroring
keyboard_arrow_right
Supports two types of QoS: port-based and DSCP
keyboard_arrow_right
Broadcast storm control with multicast packet rate settings
keyboard_arrow_right
512 kBytes buffer memory
keyboard_arrow_right
Supports 8k MAC address entries
keyboard_arrow_right
Supports jumbo frames up to 9 kBytes
keyboard_arrow_right
Supports Rapid Spanning Tree/Spanning Tree protocol
keyboard_arrow_right
Store and forward switching architecture
keyboard_arrow_right
Full/half duplex operation
keyboard_arrow_right
IEEE 802.3x flow control for full duplex
keyboard_arrow_right
Configuration via Web browser, Telnet or SSH
keyboard_arrow_right
Remote Reboot/restart
keyboard_arrow_right
LEDs for power, link/activity and PoE
keyboard_arrow_right
Two high-volume cooling fans ensure perfect ventilation
keyboard_arrow_right
Three-Year Warranty